 |
|
Product Bulletin 8/16/2004 |
|
COADŽ 23 ZINC STEARATE (Polymer Grade) |
|
| |
| DESCRIPTION |
| COADŽ 23 Zinc Stearate (Polymer Grade) was developed especially for the polymer industry with a low ash and low impurities for good melt clarity and heat stability. The medium particle size and moderately high bulk density enhances flow characteristics. |
| |
| |
| TYPICAL PROPERTIES |
|
| Total Ash, % |
............................................................................................... | |
13.6 |
|
| Moisture, % |
................................................................................................. | |
0.2 |
|
| Free Fatty Acid, % |
................................................................................... | |
0.2 |
|
| Soluble Salts, % |
....................................................................................... | |
Nil |
|
| Softening Point, C |
................................................................................... | |
120° |
|
| Apparent Density, lbs/ft3 |
..................................................................... | |
25 |
|
| Mean Particle Size, microns |
................................................................. | |
11 |
|
| Top Size %98, microns |
............................................................................. | |
35 |
|
| % Thru 325 mesh |
......................................................................................... | |
100 |
|
Appearance: Free flowing fine white powder. |
|
| |
| APPLICATIONS |
- Dry blends: COADŽ 23 Zinc Stearate (Polymer Grade) reduces caking and improves flow properties. Due to its greater density, higher loadings can be obtained in certain equipment.
|
| STORAGE AND HANDLING RECOMMENDATIONS |
|
Storage |
- |
Store at ambient temperatures away from sources of heat or from places of extreme moisture. |
|
Fire |
- |
Use water from a safe distance, preferably with a fog nozzle. |
|
Handling |
- |
Avoid contact with skin or eyes. Safety goggles are recommended. |
|
Spills |
- |
Clean up immediately. Sweep up and discard in a closed container. |
|
Disposal |
- |
Consult Federal, State, and Local regulations. Consult the telephone book or EPA for list of approved disposal companies. |
|
Other |
- |
See MSDS for COADŽ 23 Zinc Stearate (Polymer Grade) for additional health, safety, and environmental information. | |
| PACKAGING |
| COADŽ 23 Zinc Stearate (Polymer Grade) is packaged in 25 lb. and 50 lb. multiwall bags, unitized on non-returnable wooden pallets. Please contact your Norac sales representative to discuss your special packaging requirements. |
 Top |